The Rag Company Ultra H2O Complete Kit

Here's the complete kit, written fresh:

The Rag Company Ultra H2O Complete Kit

Everything you need for a premium pressure wash setup, in one box.

The Ultra H2O Complete Kit combines The Rag Company's spray gun, foam cannon, spray wand and nozzle into one matched system. Every piece was designed together, so they connect, store and feel like one tool. Just add your pressure washer and hose.

Why it's worth it

• Comfortable to use: rubber grip zones throughout, plus a trigger lock for long rinses
• No hose tangles: 360° stainless steel swivel on the gun
• Built to last: stainless steel internals, impact-resistant bodies, and a foam cannon you can rebuild
• Fast changeovers: one-handed autolock quick coupler between gun, wand, cannon and nozzle
• Paint-safe rinsing: 40° wide-fan nozzle with a soft rubber shroud
• Dial-in foam: clicking adjusters on the cannon let you repeat your favourite settings every wash
• Limited run: exclusive titanium H2O badge on the gun

What's in the box

• Ultra H2O Spray Gun
• Ultra H2O Foam Cannon with HDPE bottle
• Ultra H2O Spray Wand
• Ultra H2O Spray Nozzle (choose 3.0, 4.0 or 5.0)
• Weighted pickup tube with 1.1 and 1.25 foam cannon orifices
• Autolock quick coupler set
• M15 to M22 adapter with female hose fitting

Which nozzle do I need?

• 3.0: washers flowing 5–7 L/min
• 4.0: washers flowing 7–9 L/min
• 5.0: washers flowing 9–11 L/min

Setting up

1. Turn off your pressure washer and release any pressure before connecting anything.
2. Fit the nozzle and foam cannon orifice that suit your machine's flow rate.
3. Push the wand, cannon or nozzle into the quick coupler until it clicks, and check it's locked.
4. Do a test spray away from the car.

Using it

1. Turn on the water and pressure washer.
2. Foaming: clip the foam cannon onto the gun, set your soap ratio and fan direction with the clicking adjusters, then cover the car.
3. Rinsing: switch to the wand and nozzle. Store whichever nozzle you're not using in the holder on the gun.
4. Use the trigger lock on long rinses to save your hand.
5. When done, turn off, release pressure, and store the nozzle back in the gun's holder.

Pro tip: Load the cannon with Vonixx V-MOL for a pre-wash that lifts grime before you touch the paint..