There are ceramics — and then there’s Kronos Graphene Ceramic Clear Coat Protection – 10H+*
Specifically engineered for the professional detailer — yet refined for a more controlled, predictable install — Kronos now integrates advanced graphene infusion with a high-solids polysilazane backbone, delivering a next-generation ceramic coating that goes beyond traditional SiO₂ systems.
This ultra-concentrated, nanocrystalline polysilazane + graphene formulation chemically bonds to the surface, forming a dense, glass-ceramic shell that enhances gloss, increases surface hardness, and dramatically improves chemical and environmental resistance.
Kronos doesn’t just sit on the surface — it transforms into a cross-linked ceramic network, delivering unmatched durability, hydrophobic performance, and self-cleaning properties.
What Sets Kronos Apart
- 10H+* Hardness (Graphene Enhanced) for superior resistance to marring and environmental wear*
- Polysilazane + Graphene Technology for deeper cross-linking and enhanced durability
- Extreme Hydrophobicity & Self-Cleaning Effect for easier maintenance
- Marine-Grade Protection capable of withstanding harsh environmental conditions
- High Resistance to Chemicals, Alkaline Cleaners, and Degreasers
- Enhanced UV and Oxidation Resistance to preserve paint clarity and depth
- Controlled Flash Window for precise, professional-level installation
Kronos enhances whatever surface it’s applied to — delivering mirror-like depth on gloss finishes and a richer, more uniform appearance on matte or satin surfaces.
Durability
Kronos Graphene Ceramic Coating forms an extremely durable, high-gloss protective shell that can last up to five (5) years** on properly maintained surfaces.
* The pencil hardness scale caps at 9H — “10H+” reflects enhanced performance beyond traditional testing limits
** Longevity depends on prep, environment, maintenance, and usage
Coverage
Available in 50ml bottles
(50ml can typically coat 2 vehicles, depending on size and application technique)
INSTALLATION INSTRUCTIONS
READ FIRST
Kronos is a high-solids, professional-grade coating designed for maximum durability and performance. It is not a beginner “wipe-on/wipe-off” system. Environmental conditions and surface types will affect working time — always perform a test panel.
STEP 1: Surface Prep
- Wash and fully decontaminate (The Furies Iron Remover, clay, etc.)
- Use Peleus Panel Prep to remove all oils and residues
- Ensure surface is cool, dry, and out of direct sunlight
STEP 2: Application
- Shake bottle thoroughly
- Use a Phoenix E.O.D. Microsuede Applicator Block
- Apply 5–10 drops in a line across the applicator
- Work one panel at a time using a cross-hatch pattern
STEP 3: Flash Time
- Warm/humid: 30–45 seconds
- Cool/dry: 60–90 seconds
- Watch for hazing or rainbowing
- Do not exceed 2 minutes without testing first
STEP 4: Leveling
- Use a clean microfiber to level
- Follow immediately with a second towel
- If streaking occurs, lightly reapply to reactivate and level
STEP 5: Layering (Optional)
- Wait minimum 1 hour between layers
- Do not exceed 3 layers
Curing
- Avoid water for 24 hours
- Remove standing water for 48 hours
- Full chemical cure at 7 days
If early exposure is possible, apply Titan SiO₂ Hybrid Detailer as a sacrificial layer
Important Notes
- Always test in an inconspicuous area
- Heat and humidity significantly affect behavior
- Store tightly sealed in a cool, dry place
- Do not allow to freeze
- Use gloves and ensure proper ventilation
Protection Capabilities
Kronos Graphene Ceramic Coating provides exceptional resistance against:
- Acid rain
- Bug splatter
- Bird droppings
- Hard water spotting
- Environmental fallout
Additional Notes
* The pencil hardness scale tops out at 9H — 10H+ represents enhanced performance beyond traditional testing limits
** Longevity depends on application, environment, maintenance, and usage conditions
*** Flash and working times will vary — always test before full application
🔱 Final Word
There are coatings… and then there is Kronos.